Stationary 200tph CMI Drum PlantInventory #: DP2575

Drum: Make: CMI Parallel Flow Stationary 125hp Size: 8' x 42' Burner Gencor Astro Flame Dual Fuel 75hp Fan Fuel Preheater Almix

Cold Feed Bins: 3 bin cold feed 5hp AC Stationary Approx 9'W x 11'L x 7'Deep, 18'' Throats

Pugmill: Stationary 40hp 2 Shaft 4' x 7'

AC Tanks: 3 Tanks UNDERGROUND TANKS Direct Fired AC Pump on Pump 10hp Tach Feedback

Baghouse: Approx 40,000acfm Ratio: 5.5:1 7,121 sq foot of cloth Rows of Bags: 36 Bags in Row: 14 Bag Size: 6'' x 9'L Stationary Pulse-Jet 200hp Vane feeder 1.5hp 12"x12" Dust Blower - Gardner Denver 30hp Baghouse Compressor - Sullair 25hp Compressor 2 Ingersoll Rand 40hp

Silos: Silo with Weigh Hopper Stationary Approx 100 Tons Batcher 24'' x 72' Slat Bituma Stor I-Beam Construction 75hp

Control House and Controls: Control House - Block Building MCC - GE 8000 Al-Mix blending computer

Misc: Agg Scale 10hp Slinger 5hp

CMI 200TPH Stationary Drum Plant Asphalt Plants EQUIPMENT

Aggregate Systems Inc

Portable CMI 9X PVM DrumInventory #: DM2566

CMI 9X PVM drum Portable Triple Axle Has been patched and the shell needs to be replaced Model# PVM9X SR# 104 Portable 3 axle Parallel Flow Drum Belly chain is good, so is the sprocket Flights are good Has 1 spare trunnions Motor with Drive Package Rap Collar

NO BURNER Road Readiness Needs to Be Checked Unit Will be Down on the Ground by the End of the Year

CMI 9X PVM Drum Asphalt Plant Components EQUIPMENT

SALE PENDING - 2017 CMI 150tph Magnum Super Portable Drum PlantInventory #: DP2548

2017 CMI 150tph Magnum Super Portable

Drum: is 5'4" diameter 33' long. Control House: Unit has A/C and heating. Using two computers one screen for main mic and one for Impulse 3 software. Cold Feed Bins: 4 bin virgin feeders, scalping screen with rebuilt deck. All vulcanized splices. New motor on bin 3. Vibrator on bin 1. Rap System: 2 bin rap feeder with scalping screen. Bin 2 has air cannon and vibrator operational, bin 1 has vibe and cannon but cannon not hooked up. Fuel Tank: 10k RFO tank ready for use. AC Tanks: Split 30k A.C oil tank. 20k/10k chambers. With new eclectic heater. Asphalt Storage: Self-erect 60-ton silo and drag with weigh hopper for loading out.

CMI 150TPH Asphalt Plants EQUIPMENT

Portable CMI 61,000 acfm RA318 BaghouseInventory #: BH2507

Make: CMI Model: RA318 Portable Roto Aire Exhaust Fan and Stack Approx 61,000acfm

There is a fire slam damper in the ductwork between the dryer and the baghouse. The portable CMI reverse air baghouse has 3 sections of bags 756 total bags; each bag is 5" 1/4 wide #756 Oval 3 pocket bags 7'Long.. There is a total of 13,608 square feet of cloth that will effectively filter 61,236 cfm of dust-laden air at a 4 .5:1 air.

CMI RA318 Asphalt Plant Components EQUIPMENT

CMI 65ton Surge Bin Inventory #: SEB2615 Make: CMI Model: SE 652 SN#: SE652-116

 More Info:

 65 TON SURGE BIN REVERSE WEIGH SPLIT DISCHARGE 350 TPH SLAT CONVEYOR 19” SLATS DOUBLE CHAIN REJECT CHUTE 50 HP MOTOR AND REDUCER TANDEM AXLE (TIRES APPEAR TO BE IN GOOD CONDITION WITH MUD FLAPS AND LIGHTS) WIRE WITH QUICK DISCONNECT.

ON GROUND READY FOR LOADOUT

Location: Condition:USED

CMI SE 652 Silos EQUIPMENT

CMI PDM 732 SN: 136 Hauck Burner with Fan Wrap Collar 100hp Fan Portable, but Not Rims or Tires Patch on Combustion Zone

CMI 732 Asphalt Plant Components EQUIPMENT

Portable 100-150 TPH CMI Drum PlantInventory #: DP2030

Used portable 100-150 TPH CMI drum mix plant Portable (wheels and tires on axles—need road certification)

FOUR COLD FEED BINS: 9’ x 11’ top opening on 4 cold feed bins with two (2) conveyors to drum. Collecting conveyor The bins are constructed from 1/4” thick steel plate and each have an 9’ x 11’ top opening. The belt feeder assembly includes drive sheaves, lagged head pulley, self-cleaning tail pulley, 2-ply rated belting, idler rollers, belt take-up assembly, drive guard and adjustable control gate. The aggregate collecting conveyor is 24” powered by a 5 HP motor. The conveyor has an integrated weighbridge Tandem Axles.

DRUM: Drum diameter 6’ x 26’ long parallel flow drum W/O RAP collar &amp; wet wash scrubber with demister stack Four (4) face trunnions are machined and heat treated. Single motor drive package for the belly chain drive system. The trunnions support two steel tires made from one piece forgings. Material is discharged from the drum by abrasion resistant steel sweeper flights through a side discharge chute. An air seal with a wraparound ring is constructed from high temperature belting and installed between the drum and the discharge breeching. Swing down legs, Tandem axles.

BURNER: Hauck burner (SJO 360) &amp; Hauck blower with automatic Hauck burner controls with dual fuel manifolds for waste oil/ diesel and natural gas

WET SCRUBBER: 

SLAT CONVEYOR: The drag type conveyor is driven by a motor through a shaft mounted speed reducer. The chain is pitch roller type, having alloy steel side bars, carburized bushings, case hardened pins and hardened rollers mounted through bearings. The conveyor operates at approximately a fifty (50) degree incline for efficiency and low abrasion. Single axle.

50 TON INSULATED SILO: 

ASPHALT BLENDING SYSTEM: The asphalt pump package consists of a positive displacement asphalt metering pump with a motor. A meter sends a signal to a programmable controller which converts the signal to TPH. Following the pump assembly is a jacketed 3-way air cylinder actuated by-pass valve to pass asphalt to the drum or recirculate it to the tank.

ASPHALT STORTAGE TANK: 20,000 gallon Inferno-therm direct fired A/C tank. The liquid bitumen storage system includes one 20,000 gallon heated asphalt storage. Temperature sensors are tied into the burner controls for heat control of asphalt cement tank. Tank is insulated with unknown thickness of insulation. A 8,000 portable fuel tank is also provided for burner fuel. A.C. Tank is mounted on Tandem Axle, Fuel Tank in Mounted on Single Axle

CONTROL HOUSE: NEED OFFSITE ASAP

CMI 225TPH Drum Plant Asphalt Plants EQUIPMENT

(Mostly) Portable 150tph-175tph Drum Plant  YEAR 1980

CMI DRUM PF 7’x 32’ GEAR DRIVE 50 HP MOTOR, 4-TRUNNIONS, RAP COLLAR, REJECT CHUTE, TRIPLE AXEL, SHELL NEEDS RELINING IN THE FRONT AND FLIGHTS ARE IN POOR CONDITION STAR-JET SJO 450 COMBO OIL / GAS BURNER WITH MAXION GAS TRAIN. SET UP TO RUN ON DIESEL

CMI 4- BIN COLD FEED 8’x 10’ BINS: (MODEL PE 416) 30"X 9' VER- SPEED 3HP D.C. FEEDERS, 28"X 55' COLLECTOR BELT WITH 10' FOLDABLE STINGER, 4'X 6' SINGLE DECK SCALPING SCREEN. (SINGLE AXLE)

CMI INCLINE CHARGING CONVEYOR 30”X 60’ FEED CONVEYOR AND RAMSEY WEIGH BELT (SINGLE AXLE)

CMI DRAG SLAT CONVEYOR: (MODEL PD 106) 18"x 65’  (SINGLE AXLE) (FLOOR AND SLAT IN VERY GOOD CONDITION) CMI 100 TON SILO AND BATCHER (SINGLE AXLE) LOW PROFILE  70"

A.C. SYSTEM: 30,000 GAL SPLIT 20-10 COILED A.C. TANK WITH CEI 1500 HOT OIL HEATER (OIL/GAS) SET UP ON DIESEL WITH FUEL PUMP AND UNLOADING PUMP. (TANDEM AXLE)       DUST SILO: 400 BBL DUST SILO WITH 12" ROTARY AIR LOCK AND BLOWER KIT (NEVER HOOKED UP TO THE PLANT ALL THE PARTS LOOK TO BE INCLUDED) (SINGLE AXEL)

RECYCLE KIT: SINGLE BIN 8' X 14' (APRON CONVEYOR " MISSING SOME SLATS) 30" X 60' LATICES CONVEYOR WITH WEIGH BRIDGE (MISSING BELT) "STATIONARY"  (NEVER HOOKED UP)

CMI DUEL ROOM CONTROL HOUSE: 280 DEGREE, PLUG IN NEMA CABLE, AIR -HEAT, SYSTEM COMPUTER CONTROLS, MANUAL START STOP STATION ASTEC STATIONARY BAG HOUSE: PULSE-JET BAGHOUSE, APPROX 45,000 ACFM WITH TOP REMOVAL BAGS, BACKWARDS INCLINE 150 HP FAN. SINGLE AUGER DISCHARGE. THIS PLANT WAS SHUT DOWN TWO YEARS AGO (OWNER DIED) FULL PORTABILITY ON EVERYTHING EXCEPT "RAP KIT, AND BAGHOUSE" THE DRUM WILL NEED SOME ATTENTION TO THE SHELL ON THE COMBUSTION SIDE AND WILL NEED SOME FLIGHT WORK, THE SLAT IS LIKE NEW " THE BAGHOUSE WAS NEVER HOOKED UP ON THE PLANT NEW OWNER BOUGHT FOR PLANT BUT NEVER USED" THIS PLANT IS NOW DOWN ON THE GROUND READY FOR SHIPMENT TO NEW LOCATION LOCATED IN SOUTH EAST GA.

CMI 150-175pth Asphalt Plants EQUIPMENT

Portable 250-350tph CMI PVM Drum PlantInventory #: DP1951

CMI PVM 2500 SUMMARY: This plant is a CMI model PVM 2500 SN# 104,Is rated at 350-450 TPH. The plant is complete (MINUS WIRE). THE PLANT WAS PRODUCING 300 TPH WITH THE 55,000 ACFM BAGHOUSE WITH A LARGER BAGHOUSE PRODUCTION COULD REACH 400-450 TPH.

4 BIN COLD FEED SYSTEM: (Model # PC 432) There are four portable 10’ X 14’ bins with bin dividers for extra capacity. The 30” feeders are 12’ long and are driven by 5 hp AC Lincoln TEFC motors. The 30” collector conveyor powered by a 15 hp motor and folds up for transportation. It feeds onto the 4’ X 12’ Smico single deck screen. Aggregates then feed onto a CMI 30” wide 47’ long, heavy channel frame belt scale conveyor that includes the wind guard and gravity take up. Tandem Axle Configuration. RECYCLE PACKAGE: "BIN IS GONE". Conveyor and Screen is Still Available to go with plant Materials are fed through a Broce weigh bridge conveyor system with a 3’ X 4’ single deck scalping screen and then onto a 30” wide by nominal 66’ heavy channel frame belt scale conveyor with gravity take-up and wind guard all mounted on single axle fifth wheel carrier.

PARALLEL FLOW DRUM: The (2005 CMI model PVM-2500), 9'.6' x 42’ long recycle drum is cradle chain driven by a 100 hp motor and a Dodge TXT-10 gearbox. Both ends of the dryer are expanded for better combustion and mixing. The drum sits on a 24” wide flange beam frame manual legs to grade and steel timber footings. A slinger conveyor that is reversible for calibration introduces materials. The Hauck Starjet is model SJL4580 burning #2 diesel or recycled oil. It is powered by a 100 hp TEFC motor. Tandem Axle

Description Continued on ASIEQUIPMENTSALES.COM

CMI 250-350TPH Asphalt Plants EQUIPMENT

Portable 325tph CMI Partial Drum PlantInventory #: DP1952

CMI PARTIAL DRUM PLANT 325 TPH

CMI PORTABLE DRUM: 9'x 36' Parallel Flow Drum Straight Bore Drum (NO RAP COLLAR). Belly Cain Driven Dodge Reducer with 100hp motor. Slinger Belt Material Entry. Hauck 750 Burner. This unit sits on a Triple Axle Portable Frame.

CMI PORTABLE COLD FEED BINS: 4 BIN COLD FEED SYSTEM: (Model # PC 432) There Are Four Portable 10’ X 14’ Bins With Bin Dividers For Extra Capacity. The 30” Feeders Are 12’ Long And Are Driven By 5 hp AC Motors. The 30” Collector Conveyor Powered By a 15 Hp Motor And Folds Up For Transportation. Aggregates Then Feeds Onto a CMI 30” Wide Heavy Channel Frame Belt. Tandem Axle Configuration.

CMI PORTABLE WET SCRUBBER: 65,000 ACFM Wet Scrubber with Twin 125 HP Motors On The Fan. Connecting Duct Work To The Drum And Fan Stack Included.

KOLBERG PORTABLE ASPHALT STORAGE SYSTEM: Kolberg 65' Double Chain Slat System. Slat Has Duel Walkways To The Drive Package, The Floor Is Non Heated. Slats Head And Tail Sprockets Look To Be In Very Good Condition. A Single Axle Kolberg 50 Ton Storage Silo With A Accumulative Weigh Batcher. The Insulated Silo Has A Built In Material Reject System. Hi and Low Bindicators on the Silo. Silo Sits on a Single Axle Configuration.

CMI PORTABLE CONTROL HOUSE: 280 Degree 8' x 20' Control House With Side Mounted HEAT AND AIR. Control House is Mounted on a Single Axle 5th Wheel Chaise.

CMI 325TPH Asphalt Plants EQUIPMENT

Portable 200tph CMI Drum Plant

Drum: • CMI wishbone Drum • 3 Axle Portable • 7’ x 32’ Drum • Dodge TXT 8 30hp Drive • Newer Hauck SJO 360 Burner • Slinger Belt • 4’ x 8’ Single Deck Screen • Skid with Cable • 24’’ x 50’ Incline Lattice Weigh Bridge Conveyor, 1 axle

Rap System: • CMI • PP 2-1200 • SN 187 • Portable, 1 Axle • Single bin • 8’ x 14’ Incline bin with Grizzley • Air Cannon • 60’ Incline Weigh Bridge Conveyor • 10’ Foldable Stinger • Nema Power Box with Cable • No Crusher or Screen • In Nice Condition Overall

Baghouse: • Stansteel • SN 10-873 • 150HP Motor on Fan • Portable, 2 Axle (Tires Look Decent) • Doors Look Good • Cable Included • 40hp Quincy Screw Conveyor • 13’2’’T x 12’W x 63’L

Control House: • PEC UZ 03483 • Computer Controls • Updated Manual Controls • 280 Degree • Energy Center on Read • Missing Various Starters

AC Tank • Portable Coiled • 2 axle • Empty • Metering skid on rear • E-580-1521-AC-0 • 20,000 Gallon Tank • Unloading pump on front • Whirl power blower burner • Oil fired • Front skin issues NO HEATER OR PREHEATER INCLUDED

Cold Feed Bins • Portable • 2 axle • Has Cable • CMI PF425 • SN 191 • 3hp DC Drives (Newer Motors) • 30’’ collecting belt and 20’ stinger • 8’ x 13’ Bins • 24’’ x 10’ Feeders • Bin Dividers • Relined • Missing a few rims/tires

SEB: • CMI • SE6535W • SN116 • Slat is Off Unit (Still Onsite, On Trailer) • 2 Axle • Missing All Cable for Erection • Has Air Tank, No Compressor • Lots of Grease on the Rear Axles • Inside Bin Looks Decent • Slat conveyor, 32’’ Double Chain Slats • Slats Look Decent • Reject Chute

Lime Silo: • 500BBL • 2 Axle • Binvent • Weigh Pod with Air Lock • Has 7 Holes. Has holes cut into it to remove lime, needs to be patched.

PLANT IS ON THE GROUND AND READY FOR LOADOUT, SILOS IN PHOTO DO NOT GO WITH SALE.

CMI 200TPH Asphalt Plants EQUIPMENT

Portable 1989 55,000ACFM CMI Pulse-Jef BaghouseInventory #: BH2096

UNIT HAS NO MOTORS OR WIRE This 1989 CMI Pulse pulse-jet baghouse, Model 900 (SN# 123) baghouse, Each bag is 6”diameter and 91” long. Top removal design. That will effectively filter: 10,603 total square foot of cloth

A. (54,000 cfm of dust-laden air at a 5 to 1 air to cloth ratio) B. (63,612 cfm of dust laden air at a 6 to 1 air to cloth ratio) .

The dust is removed via 3 triple augers to a central hopper box discharge.

THIS BAGHOUSE IS MISSING MOST WIRE, ALL MOTORS, COMPRESSOR AND DUCTWORK

Nueva y Usada CMI en Venta

Filtro de búsqueda

Refinar busqueda

Tipo

Distancia

Tipo de Listado

Categoría

Fabricar

Modelo

Precio

Condición

Horas

Año

País

Estado

Ciudad

Clase

CMI 200TPH Stationary Drum Plant

CMI 9X PVM Drum

CMI 150TPH

CMI RA318

CMI SE 652

CMI 732

CMI 225TPH Drum Plant

CMI 150-175pth

CMI 250-350TPH

CMI 325TPH

CMI 200TPH

1989 CMI Pulse-Jet