Portable 100-150 TPH CMI Drum PlantInventory #: DP2030
Used portable 100-150 TPH CMI drum mix plant Portable (wheels and tires on axles—need road certification)
FOUR COLD FEED BINS: 9’ x 11’ top opening on 4 cold feed bins with two (2) conveyors to drum. Collecting conveyor The bins are constructed from 1/4” thick steel plate and each have an 9’ x 11’ top opening. The belt feeder assembly includes drive sheaves, lagged head pulley, self-cleaning tail pulley, 2-ply rated belting, idler rollers, belt take-up assembly, drive guard and adjustable control gate. The aggregate collecting conveyor is 24” powered by a 5 HP motor. The conveyor has an integrated weighbridge Tandem Axles.
DRUM: Drum diameter 6’ x 26’ long parallel flow drum W/O RAP collar & wet wash scrubber with demister stack Four (4) face trunnions are machined and heat treated. Single motor drive package for the belly chain drive system. The trunnions support two steel tires made from one piece forgings. Material is discharged from the drum by abrasion resistant steel sweeper flights through a side discharge chute. An air seal with a wraparound ring is constructed from high temperature belting and installed between the drum and the discharge breeching. Swing down legs, Tandem axles.
BURNER: Hauck burner (SJO 360) & Hauck blower with automatic Hauck burner controls with dual fuel manifolds for waste oil/ diesel and natural gas
WET SCRUBBER:
SLAT CONVEYOR: The drag type conveyor is driven by a motor through a shaft mounted speed reducer. The chain is pitch roller type, having alloy steel side bars, carburized bushings, case hardened pins and hardened rollers mounted through bearings. The conveyor operates at approximately a fifty (50) degree incline for efficiency and low abrasion. Single axle.
50 TON INSULATED SILO:
ASPHALT BLENDING SYSTEM: The asphalt pump package consists of a positive displacement asphalt metering pump with a motor. A meter sends a signal to a programmable controller which converts the signal to TPH. Following the pump assembly is a jacketed 3-way air cylinder actuated by-pass valve to pass asphalt to the drum or recirculate it to the tank.
ASPHALT STORTAGE TANK: 20,000 gallon Inferno-therm direct fired A/C tank. The liquid bitumen storage system includes one 20,000 gallon heated asphalt storage. Temperature sensors are tied into the burner controls for heat control of asphalt cement tank. Tank is insulated with unknown thickness of insulation. A 8,000 portable fuel tank is also provided for burner fuel. A.C. Tank is mounted on Tandem Axle, Fuel Tank in Mounted on Single Axle
CONTROL HOUSE:
NEED OFFSITE ASAP
