Stationary 2 Bin Cold Feed (7'x8'/7'x16')Inventory #: CF0083

Number of Bins: 2 Bin Size: First Bin: 7' x 8' Second Bin: 7' x 16' Stationary

Other:

<ul><li>Front (1st) Bin 7'x 8'</li><li>30" x 8' Variable Speed Feeder (No Drive Package)</li><li>Second Bin (2) Bin 7' x 16' Bin Feeds Main Belt</li><li>Collecting Conveyor 30" x 24' (No Drive Package)</li><li>Bins Empty (Condition Good)</li><li>Dodge Reducer, NO MOTORS</li></ul>

CF BIN 2 BIN COLD FEED Aggregate Equipment EQUIPMENT

Aggregate Systems Inc

CF BIN 4 BIN COLD FEED, Stationary 4 Bin Cold Feed (10‘x12‘) Inventory #: CF0292 Number of Bins: 4 Bin Size: 10‘ x 12‘ Stationary Other: Electric gate openings Grizzly‘s on each bin 10‘x 30" variable speed feeders (NO Motors or Gearboxes) No flow switches and tachs on each bin Bin extenders 24" walkway along bin tops All bins are relined with steel Collecting Conveyor: 30"x 48‘ belt Unit still erected MAKE OFFER

CF BIN 4 BIN COLD FEED Aggregate Equipment EQUIPMENT

CF BIN 3 BIN COLD FEED, Portable 3-Bin Cold Feed Inventory #: CF1357 Number of Bins: 3 Bin Size: 12‘ X 14‘ Other: Portable missing from section and king pin 2 axle Granite number 83-077 Has 3 hp motors and gearbox Holds 30 feeder and gathering belts Missing belts Missing discharge stinger section 12x14 bins Rough shape

CF BIN 3 BIN COLD FEED Aggregate Equipment EQUIPMENT

1 each - Portable 4 Bin Blending Hopper complete as follows:

a.  Each hopper is 9’-6” wide x 14’ long with 20 tons storage capacity constructed from 1/4” thick steel plate with rectangle tube reinforcing at the hopper top and angle iron reinforcing at the hopper mid-section and bottom section; self-relieving tapered hopper bottom opening to minimize bridging; full length skirtboards with Hercules 3/4" x 6" adjustable rubber flashing to prevent leakage between hopper bottom and belt feeder; adjustable discharge gate with hand crank to control material flow from each hopper.

b. Each belt feeder is 30” wide x 8’ long with 5 h.p. electric motor and Nord helical bevel right angle gearbox; 12” diameter rubber lagged head pulley mounted on Dodge 2-7/16” SCM pillow block bearings; 12” diameter self-cleaning tail pulley mounted on Dodge 2-3/16” SCM pillow block bearings; screw take-up assemblies; CEMA “C” flat belt idlers with 5” diameter rolls mounted on close centers; 3 ply vulcanized endless conveyor belting. Belt speed setup for 90 fpm.

c.  Collecting conveyor is 36” wide with 15 h.p. electric motor and Nord helical bevel right angle gearbox; 16” diameter rubber lagged head pulley mounted on Dodge 2-15/16” SCM pillow block bearings; 14” diameter self-cleaning tail pulley mounted on Dodge 2-7/16” SCM pillow block bearings; screw take-up assemblies; tail terminal guard; head pulley nip guards; CEMA “C” 35 degree troughing idlers with 5” diameter rolls; CEMA “C” return idlers with 5” diameter rolls; 2 ply conveyor belting with 3/16” x 1/16” rubber covers; Flexco 140 mechanical belt splice; 9’-6” long conveyor extension beyond the hoppers. Belt speed setup for 350 fpm.

d.  Portable trailer constructed of heavy duty wide flange beams which are braced for optimum rigidity; wide flange vertical beams and square tube cross members tie all hoppers and trailer together; tandem axle chassis with dual 11 x 22.5 tires, air brakes, king pin, rear lighting, mud flaps and blocking pads. Includes one set of hand crank landing legs at the king pin.

e.  One rust inhibitor prime coat and one finish coat gray paint for all equipment; one finish coat safety yellow paint for all guarding.

f.  Electric motor control panel with main disconnect, AC Tech SMV variable speed drives for each belt feeder, fixed speed starter for 15 h.p. collecting conveyor motor, circuit breaker branch circuit protection, control power transformer, start/stop push buttons for each motor, speed potentiometer for each belt feeder, emergency stop button, selector switch for each belt feeder to run only the desired belt feeders for special blends, all mounted in a NEMA 4 enclosure; includes wiring from each electric motor to the control panel; skid mounted support structure bolted to trailer frame.

CONTACT ASI FOR COST AND LEAD TIME

CF BIN 5 BIN COLD FEED, NEW Stationary 5 Bin Cold Feed (9‘6"x14‘) with Control Panel Inventory #: CF0938 12-14 weeks 1 each - Stationary 5 Bin Cold Feed Hopper complete as follows: See ASIEQUIPMENTSALES.COM for more Info

CF BIN 5 BIN COLD FEED Aggregate Equipment EQUIPMENT

CF BIN 3 BIN COLD FEED, Portable 3 Bin Cold Feed (10‘x13‘) Inventory #: CF0606 Number of Bins: 3 Bin Size: 10‘ x 13‘ Portable Other: Variable Speed 24" Feeders 10 HP Motors with Dodge TXM Reducers Motor (Disconnects) Lockouts at Each Bin OSHA Guarding Collecting Conveyor 32" (Missing Drive Package) Tail Roller on Goose neck NO BELT Single Axle Bin Extenders and Dividers

CF BIN 2 BIN COLD FEED, NEW Portable 2 Bin Cold Feed (9‘6"x14‘) Inventory #: CF0287 1 each - Portable 2 Bin Blending Hopper, Model 108-2P complete as follows: See ASIEQUIPMENTSALES.COM for More Info

CF BIN 4 BIN COLD FEED, Stationary 4 Bin Cold Feed Inventory #: CF1720 Stationary 4 Bin Tail Pully will be Reattached Prior to Loading No Motors MAKE OFFER

Nueva y Usada CF BIN en Venta

Filtro de búsqueda

Refinar busqueda

Tipo

Distancia

Tipo de Listado

Categoría

Fabricar

Modelo

Precio

Condición

Horas

Año

País

Estado

Ciudad

Clase

CF BIN 2 BIN COLD FEED

CF BIN 4 BIN COLD FEED

CF BIN 3 BIN COLD FEED

CF BIN 4 BIN COLD FEED

CF BIN 5 BIN COLD FEED

CF BIN 3 BIN COLD FEED

CF BIN 2 BIN COLD FEED

CF BIN 4 BIN COLD FEED